-
Adhesive for EPS and isolation boards Stirokol is fabricated thin layer of glue on the basis of cement and complements. Stirokol is used to stick boards over bricks, concrete, old mortar, etc. The base must be strong, smooth, clean of dust, and not frozen. The new formulation of Stirokol with cellulose fiber preserves the surface from cracking and makes it stronger and more resistant to temperatures. With its new features, Stirokol can be used for the adhesion of stone wool. -
Adhesive for EPS and isolation boards Stirokol 3 White is fabricated thin layer glue on the basis of cement and complements. It is used for the adhesion of boards over bricks, concrete, old mortar, etc. The base must be strong, smooth, clean of dust, and not frozen. Strengthening with plastic screws is obligatory. -
Adhesive for EPS and isolation boards Stirokol 3 is fabricated thin layer glue on the basis of cement and complements. It is used for the adhesion of boards over bricks, concrete, old mortar, etc. The base must be strong, smooth, clean of dust, and not frozen. Strengthening with plastic screws is obligatory. -
Stirokol 2 White is a fabricated thin layer of glue on the basis of cement and complements. Stirokol is used to stick boards over bricks, concrete, old mortar, etc. The base must be strong, smooth, clean of dust, and not frozen. The new formulation of Stirokol with cellulose fiber preserves the surface from cracking and makes it stronger and more resistant to temperatures. With its new features, Stirokol 2 White can be used for the adhesion of stone wool. -
Adhesive for EPS and isolation boards Stirokol 2 is fabricated thin layer of glue on the basis of cement and complements. Stirokol is used to stick boards over bricks, concrete, old mortar, etc. The base must be strong, smooth, clean of dust, and not frozen. The new formulation of Stirokol 2 with cellulose fiber preserves the surface from cracking and makes it stronger and more resistant to temperatures. With its new features, Stirokol 2 can be used for the adhesion of stone wool. -
Adhesive for EPS and isolation boards Stirokol is fabricated thin layer of glue on the basis of cement and complements. Stirokol is used to stick boards over bricks, concrete, old mortar, etc. The base must be strong, smooth, clean of dust, and not frozen. The new formulation of Stirokol with cellulose fiber preserves the surface from cracking and makes it stronger and more resistant to temperatures. With its new features, Stirokol can be used for the adhesion of stone wool. -
Potiefgrund is acrylic resin for interior and exterior use. It is used to adjust the absorption of moisture on the surface (which may be of brick, concrete, old plaster, etc.) before the application of gypsum-based mortar, cardboard, color, etc. Potiefgrund is ready for use and should not be mixed with water. Before applying, dust and other impurities on the surface must be eliminated. -
Poputzgrund It is a basic resin for internal and external use. Before applying the product should be mixed with 30% clean water. It is laid manually with a brush or cylindrical roller. At dry and porous surfaces Poputzgrund should be applied twice between 2-3 hours. The drying time is 24 hours. Keep on places protected from freezing. -
Pogrundputz It is a basic resin for internal and external use. Before applying the product should be mixed with 10% clean water. It is laid manually with a brush or cylindrical roller. Poputzgrund should be applied twice between 2-3 hours on dry and porous surfaces. The drying time is 24 hours. Keep on places protected from freezing. -
Mass for joint filler Pofugenfiler is a fabricated powder material for joint filler plaster tiles. A tile joint filler band is used on plaster cardboard with oval edges. Plaster-cardboard tiles have to be fastened on a strong under construction and the fudging places should be clean, dry, and without dust. -
Adhesive for granite, marble, and plates-plates Poflex 3 is a thin layer adhesive for tiles on the basis of white cement and complements. It is appropriate for sticking on concrete, bricks, light concrete, plaster tiles, etc. It is used for spaces exposed to the sun and low temperatures, and for sticking of all kinds of ceramic tiles, marble, and granite stones. The surface must satisfy construction norms. The new formulation of Poflex 3 with cellulose fiber, preserves the surface from cracking and makes it stronger and more resistant to temperatures. -
White adhesive for tiles Poflex is a thin layer of glue for tiles on the basis of white cement and complements. It is used for sticking ceramic and marble tiles on floors and walls. It is produced in white color. The surface must satisfy some building standards. The temperature of the air and surface -
Pofix 90 - Mortar with gypsum base is the mortar with gypsum, lime, and additive primer for machine and hand application. It is used as a base mortar for finishing mortar with mineral content, structural mortar, and sliding mortar. Applied in interior walls, bricks, concrete blocks, rough concrete surfaces, ceilings, etc. The use of Pobetonconactit is essential on smooth concrete surfaces. -
Pofix 75-Light Basic final mortar is a fabricated plaster mortar for mechanical treatment. It is used for covering internal walls in one layer. It can be spread brick walls, concrete blocks, concrete walls, siporex blocks, etc. The base surface must be dry, dust and oil must be removed and it must satisfy building standards. -
Pofix 50 Flattening Mortar is a fabricated mortar for external and internal use. It is used as mortar for flattening and joint between the basis and structural mortar 'abrib'. -
POFIX-110 - Mortar with a cement base is a mortar with white cement, lime, and an additive base for machine and hand application. It is used as a base mortar for final mortars with mineral content, structural mortars, and lubricating mortars. It is applied to outside and inside walls of brick, concrete, styrofoam, concrete elements in damp rooms, rough concrete surfaces, ceilings, facades, etc. The use of Stirokolit or Poflex is essential on smooth concrete surfaces. -
POFIX-10 - Mortar with a cement base is a mortar with cement, lime, and an additive base for machine and hand application. It is used as a base mortar for final mortars with mineral content, structural mortars, and lubricating mortars. It is applied to outside and inside walls of brick, concrete, styrofoam, concrete elements in damp rooms, rough concrete surfaces, ceilings, facades, etc. The use of Stirokolit or Poflex is essential on smooth concrete surfaces. -
Thermal insulation products. Extruded polystyrene foam boards as a load-bearing layer and/or thermal insulation outside the waterproofing -
Adhesive for gas-concrete bricks (siporex) Siporex is adhesive on the basis of cement, additives, and specially selected aggregates. While mixing with water we get a compound, which has the excellent capability for adhesion and flattening gas-concrete bricks (siporex). The surface must be clean and must satisfy building standards. It is not recommended to use on surfaces, which are previously prepared with gypsum compounds. -
Adhesive for cardboard tiles Pofix PERL is a fabricated material for sticking plaster-cardboard tiles. It is used to stick plaster-cardboard tiles on walls of bricks, concrete bricks, siporex, concrete surfaces etc. The surface must be clean and dry. -
POFIX THERM EPS foam boards are designed to be essential insulation components in various building structures. Manufactured from high-quality expanded polystyrene, these boards are intended for thermal insulation and specific applications where lightweight, versatile insulation is crucial. -
Pofix fino - Basic cement mortar is a cement lime mortar with additives for manual laying. It is applied on two layers of internal and external walls after the basic mortar is applied. -
POFIX THERM EPS foam boards are designed to be essential insulation components in various building structures. Manufactured from high-quality expanded polystyrene, these boards are intended for thermal insulation and specific applications where lightweight, versatile insulation is crucial. -
Pofix 705 - White structural mortar - ABRIB is fabricated, enabling the decoration of mineral mortar for internal walls. It is laid over the basic mechanical mortars (Pofix 10, Pofix 090, etc.) thermo-isolation, lengthening mortars, eps, and mineral woolen boards which are previously flattened with Pofix 50. Before applying Pofix 366 it is recommended to use Poputzgrund. -
Pofix 701 FULL - White structural mortar - ABRIB is fabricated, enabling the decoration of mineral mortar for internal walls. It is laid over the basic mechanical mortars (Pofix 10, Pofix 090, etc.) thermo-isolation, lengthening mortars, eps, and mineral woolen boards which are previously flattened with Pofix 50. Before applying Pofix 366 it is recommended to use Poputzgrund. -
Pofix 700 - White structural mortar - ABRIB is fabricated, enabling the decoration of mineral mortar for internal walls. It is laid over the basic mechanical mortars (Pofix 10, Pofix 090, etc.) thermo-isolation, lengthening mortars, eps, and mineral woolen boards which are previously flattened with Pofix 50. Before applying Pofix 366 it is recommended to use Poputzgrund. -
Pofix 366 - White structural mortar - ABRIB is fabricated, enabling the decoration of mineral mortar for internal walls. It is laid over the basic mechanical mortars (Pofix 10, Pofix 090, etc.) thermo-isolation, lengthening mortars, eps, and mineral woolen boards which are previously flattened with Pofix 50. Before applying Pofix 366 it is recommended to use Poputzgrund. -
Pofix 322 Glazing is fabricated material-glazing(finish glaze)on the basis of cement and lime for internal and external walls. It is used for glazing of basic mortars (Pofix 10, Pofix 090, etc), delicate mortars concrete surfaces, and less wet places. When it is completely dry it can be colored over or covered by wall papers. -
Pofix 222 Glazing is powder material-glazing on the basis of plaster for internal walls used manually. It is used for leveling the walls in thin layers, for smoothing rough surfaces, and various corrections on the surfaces (ex. for filling cracks). It is laid after the basic mortar is completely dry (Pofix 10, Pofix 090, etc). After it is completely dry the walls can be colored or it could be put on paper walls, etc. Before applying Pofix 200, it is recommended to use Potiefgrund. -
Pofix 200 Glazing is powder material-glazing on the basis of plaster for internal walls used manually. It is used for leveling the walls in thin layers, for smoothing rough surfaces, and various corrections on the surfaces (ex. for filling cracks). It is laid after the basic mortar is completely dry (Pofix 10, Pofix 090, etc). After it is completely dry the walls can be colored or it could be put on paper walls, etc. Before applying Pofix 200, it is recommended to use Potiefgrund. -
Tile adhesive Pofikol***15 is a thin layer adhesive on the basis of cement and complements. It is used for sticking ceramic tiles on walls and floors and arranging internal and external spaces. The new formulation of Pofikol*** with cellulose fiber preserves the surface from cracking and makes it stronger and more resistant to temperatures. -
Tile adhesive Pofikol**15 is a thin layer adhesive on the basis of cement and complements. It is used for the adhesion of ceramic tiles on walls and floors only in internal environments. -
Tile adhesive POFIKOL 15* WHITE is a thin layer adhesive on the basis of cement and complements. It is used for the adhesion of ceramic tiles on walls and floors only in internal environments. -
Tile adhesive Pofikol*15 is a thin layer adhesive on the basis of cement and complements. It is used for the adhesion of ceramic tiles on walls and floors only in internal environments. -
Podecor is a ready-mixed acrylic mortar, a decorative coat with colored stones. It is ideal for house pedestals, basement, and garage entrances. It is applied on external and internal walls, where durability and decoration are desired, on concrete walls, mineral surfaces, gypsum board, etc, where previously Poputzgrund is applied. Podekor is high quality and resistant to climate conditions. -
Interior Paint Pocolor Univerzal is the dispersive interior color for the protection and decoration of interior wall surfaces. Before applying it is strongly recommended to mix the product and add 10% clean water. It is applied manually with a brush or cylindrical roller. The base must be cleaned, strong, and dry. -
Pocolor Primer is acrylic resin for interior and exterior use. It can be used for covering the surfaces before the paint is applied. With Pocolor Primer the ability of the surface to absorb is reduced, strengthens the surface makes it smooth and the final paint results better. For excellent results, the reciprocity of dissolution with water is 1:2, but it is tolerated to 1:5. -
Interior Paint Pocolor Intra is the dispersive interior color for the protection and decoration of interior wall surfaces. Before applying it is strongly recommended to mix the product and add 10% clean water. It is applied manually with a brush or cylindrical roller. The base must be cleaned, strong, and dry. -
Pocolor Extra Pocolor Extra is the dispersive exterior color for protection and decoration of house frontages and other exterior wall surfaces, resistant to atmospheric conditions, alkalis, and salts, and it is permeable. Before applying it is strongly recommended to mix the product and add 10% clean water. It is applied manually with a brush or cylindrical roller. The base must be cleaned, strong, and dry. -
Interior Paint Pocolor Economic is the dispersive interior color for the protection and decoration of interior wall surfaces. Before applying it is strongly recommended to mix the product and add 10% clean water. It is applied manually with a brush or cylindrical roller. The base must be cleaned, strong, and dry. -
Pobetoncontact Standard It is laid on internal and external smooth concrete surfaces. Pobetoncontact is ready for use. Before applying it is strongly recommended to mix the product well and add 10% clean water. It is laid manually using a cylindrical roller. The drying time is 24 hours. -
Pobetoncontact It is laid on internal and external smooth concrete surfaces. Pobetoncontact is ready for use. Before applying it is strongly recommended to mix the product well and add 10% clean water. It is laid manually using the cylindrical roller. The drying time is 24 hours. -
Poabrib KRATZ Poabrib KRATZ is high quality, ready for use, decorative structural liquid mortar, and easy to apply, which is used for internal and external surfaces. The base must be intense, clean of dust, and not frozen. It is laid with steel tools, with a thickness the same as the largest granulation. It is processed with the plastic tool while the laid material is humid. The final product, which is already applied, is strong, waterproof, and water resistant and it is not influenced form atmospheric conditions. -
Poabrib FULL Poabrib FULL is high quality, ready for use, decorative liquid mortar, and easy to apply, which is used for internal and external surfaces. The base must be intense, smooth, clean of dust, and not frozen. It is laid with a steel tool, with a thickness the same as the largest granulation. It is processed with the plastic tool while the laid material is humid. The final product, which is already applied, is strong, waterproof, and water resistant and it is not influenced form atmospheric conditions. -
P-12 UW CEILING PROFILE P-12 is a U-wall standard ceiling profile also called UW-70. The U-wall profile is fastened to the wall all the way around according to the desired installation height. -
P-11 UW CEILING PROFILE P-11 is a U-wall standard ceiling profile also called UW-70. The U-wall profile is fastened to the wall all the way around according to the desired installation height. -
P-10 UW CEILING PROFILE P-10 is a U-wall standard ceiling profile also called UW-50. The U-wall profile is fastened to the wall all the way around according to the desired installation height. -
P-09 CW CEILING PROFILE P-09 is a C-wall standard ceiling profile also called CW-100. The C-wall profile is fastened to the wall all the way around according to the desired installation height. When creating a ceiling suspension, ceiling cladding, or attic conversion with Pofix CD ceiling profiles, pay attention to the corresponding detailed drawing, to increase stability on ceilings, planking across the profiles (carrying profile) is absolutely necessary.
30 Years experience is our GuaranteeALL THE TIME POFIX WITH ENERGY EFFICIENCY IN MIND
Headquarters
POFIX DOO
Dereboj Bb, Tetova,
1200, Macedonia
Phone: +389 71 329 173
Phone: +389 71 329 273
[email protected]
MAIN OFFICE – KOSOVO
POFIX SHPK
Lipjan pn,
14000, R. Of Kosova
Phone: +383 49 180 783
Phone: +383 49 180 785
Phone: +383 49 180 575
Phone: +383 49 180 786
[email protected]
TOP RATED PRODUCTS
TAGS
Abrib
Acrylic Base
Acrylic Decorative Mortars
Acrylic Mortars and Paints
Acrylic Products
Adhesive for EPS and isolation boards
Aquastop
BASIC MORTARS
Construction Adhesive
CORNER PLASTER PROFILE
CORNER PROFILE
CW50
Decorative Mortars
Exterior Color
Flattening Mortar
Glazing
Interior Color
Interior Paint
MINERAL PRODUCTS
Mortar with a cement base
P-01
P-02
P-03
p-04
P-07 CW CEILING PROFILE
P-09 CW CEILING PROFILE
P-10 UW CEILING PROFILE
P-11 UW CEILING PROFILE
PoBetonContact
POCOLOR ECONOMIC
Pocolor Extra
Pocolor Intra
Pocolor Primer
Pocolor Univerzal
Podecor
Pofix
POFIX-10
Pofluids
POTIEFGRUND
Profiles
QUICK PLASTER PROFILE
Stirokol Standard
Tile Adhesive
Waterproofing
White structural mortar
© Copyright 2002 - 2024 | | All Rights Reserved | Powered by POFIX