Shop - POFIX - Page 3

30 Years experience is our GuaranteeALL THE TIME POFIX WITH ENERGY EFFICIENCY IN MIND

POFIX-75 LIGHT

Pofix 75-Light Basic final mortar is a fabricated plaster mortar for mechanical treatment. It is used for covering internal walls in one layer. It can be spread brick walls, concrete blocks, concrete walls, siporex blocks, etc. The base surface must be dry, dust and oil must be removed and it must satisfy building standards.

Details
POFIX-50

Pofix 50 Flattening Mortar is a fabricated mortar for external and internal use. It is used as mortar for flattening and joint between the basis and structural mortar 'abrib'.

Details
POFIX FINO

Pofix fino - Basic cement mortar is a cement lime mortar with additives for manual laying. It is applied on two layers of internal and external walls after the basic mortar is applied.

Details
POFIX 200

Pofix 200 Glazing is powder material-glazing on the basis of plaster for internal walls used manually. It is used for leveling the walls in thin layers, for smoothing rough surfaces, and various corrections on the surfaces (ex. for filling cracks). It is laid after the basic mortar is completely dry (Pofix 10, Pofix 090, etc). After it is completely dry the walls can be colored or it could be put on paper walls, etc. Before applying Pofix 200, it is recommended to use Potiefgrund.

Details
POFIX 222

Pofix 222 Glazing is powder material-glazing on the basis of plaster for internal walls used manually. It is used for leveling the walls in thin layers, for smoothing rough surfaces, and various corrections on the surfaces (ex. for filling cracks). It is laid after the basic mortar is completely dry (Pofix 10, Pofix 090, etc). After it is completely dry the walls can be colored or it could be put on paper walls, etc. Before applying Pofix 200, it is recommended to use Potiefgrund.

Details
POFIX 322

Pofix 322 Glazing is fabricated material-glazing(finish glaze)on the basis of cement and lime for internal and external walls. It is used for glazing of basic mortars (Pofix 10, Pofix 090, etc), delicate mortars concrete surfaces, and less wet places. When it is completely dry it can be colored over or covered by wall papers.

Details
POFIX 366

Pofix 366 - White structural mortar - ABRIB is fabricated, enabling the decoration of mineral mortar for internal walls. It is laid over the basic mechanical mortars (Pofix 10, Pofix 090, etc.) thermo-isolation, lengthening mortars, eps, and mineral woolen boards which are previously flattened with Pofix 50. Before applying Pofix 366 it is recommended to use Poputzgrund.

Details
POFIX 705

Pofix 705 - White structural mortar - ABRIB is fabricated, enabling the decoration of mineral mortar for internal walls. It is laid over the basic mechanical mortars (Pofix 10, Pofix 090, etc.) thermo-isolation, lengthening mortars, eps, and mineral woolen boards which are previously flattened with Pofix 50. Before applying Pofix 366 it is recommended to use Poputzgrund.

Details
POFIX 701 FULL

Pofix 701 FULL - White structural mortar - ABRIB is fabricated, enabling the decoration of mineral mortar for internal walls. It is laid over the basic mechanical mortars (Pofix 10, Pofix 090, etc.) thermo-isolation, lengthening mortars, eps, and mineral woolen boards which are previously flattened with Pofix 50. Before applying Pofix 366 it is recommended to use Poputzgrund.

Details
POFIX 700

Pofix 700 - White structural mortar - ABRIB is fabricated, enabling the decoration of mineral mortar for internal walls. It is laid over the basic mechanical mortars (Pofix 10, Pofix 090, etc.) thermo-isolation, lengthening mortars, eps, and mineral woolen boards which are previously flattened with Pofix 50. Before applying Pofix 366 it is recommended to use Poputzgrund.

Details
STIROKOL 2 WHITE

Stirokol 2 White is a fabricated thin layer of glue on the basis of cement and complements. Stirokol is used to stick boards over bricks, concrete, old mortar, etc. The base must be strong, smooth, clean of dust, and not frozen. The new formulation of Stirokol with cellulose fiber preserves the surface from cracking and makes it stronger and more resistant to temperatures. With its new features, Stirokol 2 White can be used for the adhesion of stone wool.

Details
STIROKOL

Adhesive for EPS and isolation boards Stirokol is fabricated thin layer of glue on the basis of cement and complements. Stirokol is used to stick boards over bricks, concrete, old mortar, etc. The base must be strong, smooth, clean of dust, and not frozen. The new formulation of Stirokol with cellulose fiber preserves the surface from cracking and makes it stronger and more resistant to temperatures. With its new features, Stirokol can be used for the adhesion of stone wool.

Details
STIROKOL 2

Adhesive for EPS and isolation boards Stirokol 2 is fabricated thin layer of glue on the basis of cement and complements. Stirokol is used to stick boards over bricks, concrete, old mortar, etc. The base must be strong, smooth, clean of dust, and not frozen. The new formulation of Stirokol 2 with cellulose fiber preserves the surface from cracking and makes it stronger and more resistant to temperatures. With its new features, Stirokol 2 can be used for the adhesion of stone wool.

Details
STIROKOL WHITE

Adhesive for EPS and isolation boards Stirokol is fabricated thin layer of glue on the basis of cement and complements. Stirokol is used to stick boards over bricks, concrete, old mortar, etc. The base must be strong, smooth, clean of dust, and not frozen. The new formulation of Stirokol with cellulose fiber preserves the surface from cracking and makes it stronger and more resistant to temperatures. With its new features, Stirokol can be used for the adhesion of stone wool.

Details
STIROKOL STANDARD

Adhesive for EPS and isolation boards Stirokol 3 is fabricated thin layer glue on the basis of cement and complements. It is used for the adhesion of boards over bricks, concrete, old mortar, etc. The base must be strong, smooth, clean of dust, and not frozen. Strengthening with plastic screws is obligatory.

Details
STIROKOL STANDARD WHITE

Adhesive for EPS and isolation boards Stirokol 3 White is fabricated thin layer glue on the basis of cement and complements. It is used for the adhesion of boards over bricks, concrete, old mortar, etc. The base must be strong, smooth, clean of dust, and not frozen. Strengthening with plastic screws is obligatory.

Details